Ceiling Installation - Samsung AM Series Installation Manual

Ceiling installation

It is recommended to install theY-joint before installing the
indoor unit.
1 Select pipe directions.
When the directions are selected, drill 3-1/8''-(100mm,
for pipe and cables) and 1-3/4''-(40mm, for drain hose)
diameter holes on the wall so that it slants slightly
downwards toward the outdoor for smooth water
flow.
Note Use the pattern sheet to select pipe directions.
2
Drill holes for anchor bolts according to the distance
and mount them.
Use the pattern sheet.
Note
3
Install the unit onto the ceiling. Be sure to arrange the
I
drain hose so that it is leveled lower than the drain
hose connecting port of the indoor unit.
For proper drainage of condensate, give a 2°
Note
slant to the side of the unit which will be connected
with the drain hose as shown in the figure.
Ensure that the ceiling is strong enough to
support the weight of the indoor unit. Before
hanging the unit, test the strength of each
attached suspension bolt.
4 If installing on dropped ceiling, install threaded rod
onto anchor bolt-(expansion bolt) to long enough to
suspend the unit right below the dropped ceiling and
the install the unit suspending on the threaded rod.
300mm or more
Unit : mm
1000
922
Back side
45
50
: http://splitoff.ru/tehn-doc.html
300mm or more
2
Connection pipe
Drain hose
Connection pipe
Drain hose
7