To Turn Off The Power; Plug And Play - Dukane 28A8035 Operating Manual

Basic operations (continued)

To turn off the power

3
1 Press the STANDBY/ON button, for 1 second.
· The ON indicator blinks orange and the lamp turns off. (About 1 minute later), the fan stops and
the indicator lights up orange.
· Press the STANDBY/ON button for short time (less than 1 second), the projector do not set in
standby mode.
2 Turn the MAIN POWER switch of the projector off.[
3 Install the lens cap.
· To reduce temperature inside the projector, fan will rotate for about 1 minute after the lamp
Caution
is turned off.
· Do not turn off the MAIN POWER switch during the lamp on because the lamp is damaged.
PLUG&PLAY
This projector complies with VESA DDC1/2B specifications. PLUG&PLAY is a system with computer,
peripherals (including projectors), and operating system.
It works when the projector is connected to DDC (Display Data Channel) ready computer that is running
an operating system software that incorporates plug & play functionality.
(Only RGB 1)
14
2
1
STANDBY/ON
1
FREEZE
STANDBY/ON
INPUT
POSITION ON
MUTE
MENU
RESET
RESET
MENU ON
MUTE
VOLUME
MAGNIFY
OFF
LASER
RIGHT
MOUSE ON
BLANK TIMER
RGB VIDEO
INPUT
: OFF]