Setting A Reset Signal - Fujitsu PGA-401P Operation Manual

Chapter 5 Usage

5.3 Setting a Reset Signal

The reset signal is supplied to evaluation MCU from the user system or the emulater. Please use a setup at
the time of product shipment of a jumper plug.
Setting the Reset signal
A setup at the time of product shipment of a jumper plug is shown in Fig. 5.3-1. By this setup, the
INITX signal (INIT) of evaluation MCU is supplied from the INITX signal of a user system via an
emulator, and the TRSTX signal (TRST) of evaluation MCU is supplied from the reset signal of an
emulator.
Figure 5.3-1 Setting the Reset Signal Setting Jumper Plugs (Factory Setting)
30
All manuals and user guides at all-guides.com
USR
USR
INIT
EML
EML
TRST