Connecting The Adapter Board With The Header Board - Fujitsu PGA-401P Operation Manual

4.2 Connecting the Adapter Board with the Header Board

Connect the adapter board with the header board using a flat cable coming with the adapter as illustrated in
Figure 4.2-1.
Connecting the Adapter Board to the Header Board
• To connect the flat cable, insert each of its connectors into the mating connector on each board
until the eject lock of the cable's connector locks into place in the board's connector.
• To disconnect the flat cable, pinch the eject lock of each of its connectors to unlock the con-
nector and unplug the cable.
Note : Before plugging or unplugging the cable, turn off the power supply.
When unplugging the cable, remove it while holding the case connector without pulling the cable itself.
All manuals and user guides at all-guides.com
Adapter board
Flat cable
connector A connector B
Eject lock
Figure 4.2-1 Connecting the Adapter Board with the Header Board
Flat cable
Flat cable
Flat cable
connector A
Chapter 4 Connections
Eject lock
Flat cable
connector B
Header board
19