Setting Up The Adapter; What Setup Accomplishes; Utilities To Use; To Set Up The Adapter - Fujitsu PagePrinter User Manual

Setting up the
adapter
5-6
Now that you have installed and started the utility, you need to set up the
adapter so that you can send print jobs to it.

What setup accomplishes

In the process of setting up the adapter, you accomplish two major tasks:
•
creating the components, or objects, that NetWare needs to use with the
adapter
•
configuring the adapter so that it operates in the desired mode (PSERVER or
NPRINTER/RPRINTER), and giving the adapter information about its
network components
Please note that NetWare 3.x uses the term RPRINTER for setting up a printer
in remote printer mode. This same mode is called NPRINTER in NetWare 4.x.

Utilities to use

To set up the adapter, you may use either:
•
the Network Printer Utility alone.
This utility provides all of the functions you need to set up the adapters
in a NetWare environment. The utility is designed to meet the needs of a
network administrator and can only be started by a person who has
network supervisory rights.
Functions that you may be accustomed to doing from PCONSOLE (such
as setting up print queues) can be managed from the Network Printer
Utility.
•
PCONSOLE or NWADMIN, plus the Network Printer Utility.
If you are accustomed to using PCONSOLE or NWADMIN to set up
NetWare components or objects, you may continue to do so. Then use
the Network Printer Utility to configure the adapter.

To set up the adapter

1 From the Network Printer Utility's menu bar, select Help, (even if you
want to set up the adapter using PCONSOLE and this utility.)
2
From the Help's Table of Contents, select Configuring the Adapter.
3
Select the section that is relevant to you.
Sections devoted to NetWare 3.x and 4.x are listed, including information about
PCONSOLE methods of setting up the adapter.
PagePrinter Network Adapter : Utilities & Environments

Setting up the adapter