Tuner Operation - Dual XD1222 Installation & Owner's Manual

Seek Tuning
Manual Tuning
FM Stereo/Mono
Band
Frequency Spacing
Storing and Recalling
Station Presets
Automatically Store
Stations
Preset Scan
nn
Press TUNE
next strong station.
nn
Press TUNE
then release. "MANU" will momentarily appear in the display.
nn
Press TUNE
frequency up or down one step at a time. Press and hold to
advance quickly. If tuning is not adjusted for 5 seconds, the
unit will return to seek tuning mode (default). "AUTO" will
momentarily appear in the display.
Press ST/MO for more than 2 seconds during FM tuner
operation to select mono or stereo (default) reception of the
broadcast signal.
Press BAND to select between FM1, FM2, FM3 and AM1, AM2
bands.
Press and hold BAND then press TUNE
European frequency spacing. Press and hold BAND then
ll
press TUNE
Anytime frequency spacing is changed, all station presets
are erased.
Up to 18 FM stations and 12 AM stations can be stored.
To store a station, select the desired band and station.
Press and hold the desired preset button for more than 2
seconds. When stored, the preset number will appear in the
display. The station can be recalled anytime by pressing the
corresponding preset button.
Press AS/PS for more than 2 seconds to automatically store
the six strongest stations in the current band.
Press AS/PS momentarily to scan presets 1-6 on the current
band, pausing for 5 seconds at each. Press AS/PS again to
cancel.
XD1222 OPERATION
Tuner Operation
ll
or TUNE momentarily to seek the
ll
or TUNE for more than 2 seconds,
ll
or TUNE momentarily to move radio
to select USA frequency spacing (default).
nn
to select
7