Bluetooth Setup Menu - Dual XDMA6355 Installation & Owner's Manual

XDMA6355 OPERATION
Bluetooth
Function
Redial Menu
Audio Transfer
Call Waiting
Call Hold
Bluetooth Setup Menu
Menu Function
Bluetooth Mode
Auto Connect
Auto Answer
Bluetooth Audio
*See page 7 for Setup Menu navigation
24
Operation
®
To enter last number dialing mode, press
time. The head unit will display "REDIAL MENU."
Press SELECT to cycle through the received, dialed or missed call
categories. Rotate the volume knob to cycle through the last 5 calls
in the selected category.
Press to begin dialing the selected number while it is displayed.
"DIALING" will appear on the head unit display.
To transfer the phone call between the head unit and the mobile
device, press and hold DISP for 3 seconds during a call. Tip: transfer
audio to your mobile device before turning the head unit off.
When there is a second call incoming, press
waiting. The current call will be placed on hold, and the second call
will be active. Press
During a phone call, press
resume the phone call, press
Options
Enables the BTM60 Bluetooth Interface Module. The
BT ON
Bluetooth icon will flash every 10 seconds.
BT OFF Disables Bluetooth support.
Allows the BTM60 to automatically (re)connect to the
ACNT ON most recently connected mobile device. Note: Some
mobile devices do not support this feature.
Disables the auto connect feature. You must press
ACNT OFF
every time to connect a mobile device.
Disables the auto answer feature. Press
AANS OFF
receive an incoming call.
All incoming calls will be answered automatically -
AANS ON
without notification.
SPK 2-CH Directs the Bluetooth audio to the front speakers.
SPK 4-CH Directs the Bluetooth audio to all 4 speakers.
Description
again to return to the first call.
to place the current call on hold. To
again.
Action
, then press a second
to activate call
to