Bluetooth Operation - Dual XDMA6355 Installation & Owner's Manual

XDMA6355 OPERATION
Bluetooth
Overview
Connecting a Bluetooth device requires first connecting the Dual BTM60 Bluetooth
interface module (sold separately). When connected to a Dual Bluetooth ready head unit,
the BTM60 supports the HFP (hands-free profile), A2DP (advanced audio distribution
profile) and AVRCP (audio video remote control profile).
Preparation
Before you can use a mobile device with this head unit, it must be paired and connected.
Please make sure that Bluetooth is activated on your mobile device before you begin the
pairing process. Refer to the owner's manual of your mobile device for more details.
Bluetooth Pairing
1) To pair a Bluetooth enabled mobile phone to your head unit, press
or BTM60, or press MODE until "DUAL_BTM60" is displayed.
2) Press and hold
displayed, the Bluetooth icon will flash every second. The head unit will begin to
broadcast the pairing signal for 90 seconds.
3) Complete the pairing from the Bluetooth menu of your mobile device by searching
for new devices. Please refer to your mobile device instructions for further information
on Bluetooth pairing and connections. The Bluetooth icon will illuminate solid when
connected.
The BTM60 device name is "DUAL_BTM60."
The password for the DUAL BTM60 is 1234.
Connection Notes
• If AUTO-CON is set to OFF, you must press
• From Bluetooth standby mode, press
BTM60.
• If your mobile device becomes disconnected, press
reconnect your mobile device to the BTM60.
• To connect a different mobile device, the currently connected mobile device must be
disconnected. If this different device has been paired previously, you may reconnect using
the mobile device's Bluetooth menu, or repeat the above pairing instructions.
Compatibility
• Due to the differences in Bluetooth technology, some mobile devices may be
incompatible or function improperly when used with the BTM60.
22
Operation
®
on the head unit or BTM60 for 5 seconds, until "PAIRING" is
to connect after pairing.
to disconnect your mobile device from the
from Bluetooth standby mode to
on the head unit