Additional Playback Features; Programming The Track Order - Pioneer Elite PRB-19RW Operating Instructions Manual

Compact disc recorder

Table of Contents

Programming the Track Order

Programming the track order means telling the player precisely which tracks, and in what order, you want played. You can

program a sequence of up to 24 steps (each step can contain either a track or a pause in the program), playing tracks more

than once if you like.

The sequence you program applies only to the disc in the player at the time: as soon as you eject that disc the program

memory is lost. Note that you can only program the track order from the remote control.

As you program tracks, the

total running time of the

program is displayed here.

This shows the track

number just programmed.

Clearing a program

Since the program only applies as long as the disc is in the player, you can clear it by

simply ejecting the disc. Alternatively, stop the disc, then press 7 (stop) one more

time: the program will be erased.

Clearing a track from the program

During playback or while the disc is stopped, you can delete the last (most recently)

programmed step by pressing

several steps (if the program is playing while you're doing this, you can't clear steps

beyond the one that is currently playing).

Checking what's in the program

In stop mode you can check the contents of the program using the

the remote. Each press steps through the program. At each step the display shows

the step number and the corresponding track number. When you reach the end of

the program, a step number of 00 is displayed.

Replacing a track in the program

If, while checking the program (see above), you decide you want to change some-

thing, simply stop at the step number you want to change and enter a new track

number using either the number keys or the 4 and ¢ (track skip) buttons.

During playback or stop mode, press PGM.

The

PGM

track in the program:

Enter the track numbers in the order you want

them played.

>10

Use the number buttons to select tracks:

❖

For track numbers 1 to 10, use the corresponding number button.

❖

For track numbers over 10, press the >10 button, then enter the track

number. For example, to select track 28:

If the player is stopped, you can use the 4 and ¢ (track skip) buttons

to select tracks, pressing

❖

When programming in stop mode only: To program a pause, press

the 8 (pause) button instead of a track number (you can't program a

pause as the first item). Instead of a track number, the display shows

Press 3 (play) to start playback.

❖

If you started programming while the disc was playing, the program

starts right after the current track has played out. If you want the

program to start right away, press 3 (play).

on the remote. Press repeatedly to clear

CLEAR