Table of Contents
Advertisement
What's What
Front Panel
1
Digital Recording System
1 POWER switch (p.15)
Switches power to the unit on and off.
2 SKIP ID SET (p.31)
Instructs the player to skip a particular track on playback.
3 SKIP ID CLEAR (p.32)
Clears the above setting.
4 SKIP PLAY (p.27)
Press to switch skip play on and off. When on, the
player will skip tracks that skip
5 DISP OFF (p.17)
Press to switch the character display off. The indicator
above the button lights to remind you that the display is
switched off.
6 Function indicator
Indicates the current function of the unit:
Red – recording
Blinking red – record-mute and
Green – playback
Orange – erasing a rewritable disc
7 OPEN/CLOSE 0 (p.15)
Press to open or close the disc tray.
8 RECORD ¶ (pp.23–24)
Press to enter record-pause mode for setting input
levels, etc.
9 REC MUTE • (p.29)
Records a blank section on a disc (for space between
tracks, etc.)
p INPUT SELECTOR (pp.20–24)
Selects an input: analog, coaxial or optical.
q REC LEVEL (p.24)
Sets the recording level for analog-input recording.
Outside ring controls left input level; inside dial controls
right input level.
12
<PRB1286>
2
3
4 5
◊ÛB - ,/Bˆ
w
e
r
t
y
s have been set for.
ID
-record modes
PMA
6
7
8
u
i
o
w TRACK NUMBER AUTO/MANUAL (p.28)
Switches between automatic and manual track number-
ing when recording a disc. Indicator lights to remind
you when manual track numbering has been turned on.
e TRACK NUMBER WRITE [MANUAL] (p.28)
Press during recording to start a new track number
(when in manual track numbering mode).
r FINALIZE (p.33)
Press to start the disc finalization process (to make
recordable
s playable on ordinary
CD
t ERASE (CD-RW discs only) (pp.34–35)
Press to erase the last recorded track, all tracks on a
disc, or to re-initialize a whole disc.
y Remote sensor (p.14)
u Character display (p.13)
i 4 1 and ¡ ¢ (pp.15–16)
Press to skip tracks (backwards/forwards); press and
hold for fast-reverse and fast-forward playback.
o 3 (p.15)
Press to play, or resume playing, a disc. Also use to
start recording from record-pause mode.
; TIME (p.17)
Switches the display mode (elapsed track time,
remaining track time, total disc playing time, etc.)
a 8 (p.15)
Press to pause playback or recording.
s 7 (p.15)
Press to stop playback or recording.
d DIGITAL SYNCHRO (pp.20–22)
Press to start recording on detection of an input signal.
f PHONES jack
Plug in a pair of stereo headphones for private listening
or monitoring.
g LEVEL
Use to adjust the phones volume level.
9
p
q
Hi-bit Legato Link Conversion
;
a
s
d f
g
players).
CD
Advertisement
Table of Contents
