The Rear Panel; Midi In And Out Ports - Kurzweil FlashPlay PC 4 SE Getting Started Manual

The Rear Panel

POWER Button
Press the POWER button to power the PC4 SE on or off.
DC Power Jack
Plug the included power adaptor into the DC Power jack.
USB Ports
Use the USB ports to connect the PC4 SE to a computer/tablet or USB hard drive in order
to do the following:
• Use the PC4 SE as a MIDI controller to play software instruments on a computer/
• Play and control the PC4 SE with a USB MIDI controller.
• Use a computer/tablet to sequence multi-channel songs on the PC4 SE.
• Backup and restore User Programs and Multis on a USB hard drive.
• Update the software and sounds of the PC4 SE.

MIDI IN and OUT Ports

Use the MIDI ports to communicate with other MIDI modules and controllers. The OUT
port is the MIDI transmitting port, and the IN port is the MIDI receiving port.
To use the PC4 SE as a MIDI controller for another sound module, use a MIDI cable to
connect the PC4 SE's MIDI OUT port to the MIDI input port of the module that you want
to control.
To control the PC4 SE using another MIDI controller, use a MIDI cable to connect the PC4
SE's MIDI IN port to the MIDI output port of the controller that you will be using.
Display Brightness Knob
Use the display Brightness knob to control the display brightness.
tablet.
The Rear Panel
POWER Button
11