Denso 400BW-CE User Manual page 99

[3.2] Beeper/Vibration
Adjusting the beeper volume
Switching the beeper and vibrator
Double-tap the "Beeper/Vibration", and the Beeper/Vibration property
appears.
On this menu, you can adjust the beeper volume and switch the
beeper and vibrator.
Choose the Volume tab to display the screen shown at left where you
can select the beeper volume for the following operations.
Beeper:
Key clicks:
Half-press key clicks:
Screen taps:
Trigger key clicks*:
Laser lighting key clicks*: Beeper volume to be applied when the
* The trigger switch or laser lighting key can be assigned to magic
keys.
Choose the Rumble Device tab to display the screen shown at left.
You may select any of three ways--beeping only, vibrating only, and
beeping and vibrating as a confirmation of completion of bar code
reading.
Beeper: Beeping only (default)
Vibration: Vibrating only
Beeper/Vibration: Beeping and vibrating
79
Chapter 2 Getting Started the BHT and System Menu
From the six levels 0 (low) to 5 (high).
(Default: 5)
Beeper volume to be applied when any
key is pressed. (Default: Loud)
Beeper volume to be applied when any
key is halfway pressed. (Default: OFF)
Beeper volume to be applied when the
screen is tapped. (Default: Loud)
Beeper volume to be applied when the
trigger switch is pressed. (Default: OFF)
laser lighting key is pressed. (Default:
OFF)