Denso 400BW-CE User Manual page 115

Testing with Ping
Tapping the Ping Start button when the RF device is not opened automatically opens the RF device
and runs Ping.
Tapping the Ping tab on the NIC Control property displays the screen
shown at left.
Dest IP:
Data size:
Interval:
Timeout:
Type 1 or Type 2: Select the echo request send timing Type 1 or
Count:
To run Ping, tap the Ping Start button or press the ENT key.
95
Chapter 2 Getting Started the BHT and System Menu
Specify the IP address of a host computer that
you want to ping.
Specify the data size of an echo request.
Specify the echo request intervals (in units of
100 ms).
Specify the timeout period (in units of 100 ms)
for an echo request.
Type 2 (described on the next page).
Specify the number of echo requests to be sent.