Denso 400BW-CE User Manual page 57

Cold-booting the BHT
If a problem persists even after warm-booting the BHT, cold-boot the BHT.
Cold-booting the BHT will erase all data stored in the RAM. It is recommended that important data be
saved into the FLASH folder or uploaded to the host computer.
Cold booting procedure
Turn the BHT off. While holding down the reset button with the stylus, press the power key and then
release them. Press the power key again, and the BHT cold-boots.
Contents of the memory after warm-/cold-booting the BHT
Data in the FLASH folder
Data in other folders
Contents of the Registry
Data being edited
* If the Registry has been backed up, the backup will apply. For the backup procedure, refer to Section
2.3.4, "[2] Backing up the Registry."
Application program to run automatically at warm-/cold-boot
If any execution program file (XXXXXX.exe) is stored in the FLASH\StartUp folder, warm- or
cold-booting the BHT automatically runs that program file.
Chapter 2 Getting Started the BHT and System Menu
After warm booting
Retained
Retained
Retained
Erased
37
After cold booting
Retained
Erased
Erased*
Erased