Denon D-A03 Operating Instructions Manual page 25

5
When registration is completed
Press (or
C D
6
Starting the playback
Press (or
C D
• When playback of the track last registered is completed, the unit will stop automatically.
To check which tracks are programmed
While in the stop mode, press
(or, or on the remote control).
• Each time the button is pressed, programmed selections
are displayed in order.
Adding tracks to the program
If a program has been previously stored,
then follow step 1 to 5 to add tracks.
The new tracks will be stored after the last track of the
original program.
C D
on the remote control).
C D
on the remote control) to start playback.
or
SKIP SKIP
To clear the programmed selection
C D
z Press
on the remote control and
select the input.
x While the unit is stopped in the
programmed play mode, press
the remote control.
Ejecting a CD automatically cancels the programmed
sequence.
NOTE:
• Tracks cannot be registered or deleted while the unit
is stopped or in pause mode.
ENGLISH
CLEAR
on
25