2-Channel Mode Settings - Denon ADV-M71 Operating Instructions Manual

[2] 2-channel mode settings

• When 2-channel signals are input, one of two playback modes can be selected and set according to the 2-channel mode setting, Virtual 1 or
Virtual 2. (The Virtual 1 mode is set by factory default.)
Virtual 1 : 2-channel sources are played in virtual surround using Dolby Pro Logic II Cinema processing.
Virtual 1 : 2-channel sources are played in virtual surround using Dolby Pro Logic processing.
B
DVD SURROUND RECEIVER ADV-M71
ON / STANDBY
TEST TONE INPUT MODE SURROUND
A / V DVD
SYSTEM
1 2
DVD
8 9
6 7
STATUS
3
SETUP
ENTER
CH SELECT
RETURN DISPLAY
ANGLE AUDIO
RC-936
NOTES:
• The 2-channel mode cannot be set when Dolby Digital or DTS
5.1-channel signals.
• The 2-channel mode is set and stored in the memory individually
for the different functions.
1,2,3
SURROUND / SELECT
PUSH - PARAM.
- +
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB VOLUME
FUNCTION
PHONES
FUNCTION
1
TUNER TV / VCR
IN/SURR.
MD IN/SURR.
CDR TAPE
+
-
MUTING
TONE /SDB
3
SURROUND
PARAMETER
2
- +
VCR CH
MENU TOP MENU
SUB TITLE
1 Set the surround mode to "DOLBY VIRTUAL SPEAKER"
("DOLBY VS").
• The normal display reappears after the surround mode is
displayed.
SURROUND / SELECT
PUSH - PARAM.
Main unit
2
Press the SURROUND PARAMETER
button and select the 2-channel
mode.
2 V I R T U A L 1
This can be selected if there is no
digital input signal, if the digital
input is a PCM or Dolby Digital 2-
channel signal and if the input is
analog.
3 Turn the SURROUND/SELECT control on the main unit or use
the 1 cursor buttons on the remote control unit to
0 and
select the desired 2-channel mode.
SURROUND / SELECT
PUSH - PARAM.
Main unit
VIRTUAL 1 VIRTUAL 2
Once the surround parameters have been set, stop operating the
buttons. After several seconds, the normal display reappears and
the settings are automatically entered
ENGLISH
SURROUND
Remote control unit
SURROUND / SELECT
PUSH - PARAM.
Main unit
SURROUND
PARAMETER
Remote control unit
Remote control unit
51