Connecting To A Tv Or Monitor Equipped With Component Input Connectors - Denon ADV-M71 Operating Instructions Manual

(6) Connecting to a TV or Monitor Equipped with Component Input Connectors.

• When making connections, also refer to the operating instructions of the other components.
• The video signals input to the VIDEO input (yellow) and S-Video input jacks are not output to the color difference (component) video jacks.
Color component output connectors (P
The red (P /C ), blue (P
R R
reproduction of the colors.
• The color component input connectors may be marked differently on some TVs or monitors (P
Y, B-Y and Y/C , C
R
Connect in this way if your TV is compatible with Progressive Scan.
NOTES:
• Use the three commercially available video cords to connect the ADV-M71's color component output connectors to the TV or
monitor.
• Set the "TV TYPE" in "VIDEO SETUP" in "DVD SETUP" to comply with your TV's video format. When the TV is NTSC formated
set to NTSC.
About selecting the video output "INTERLACED" or "PROGRESSIVE", refer to page 39.
•
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE "STANDARD DEFINITION" OUTPUT.
/C , P /C
R R B
/C ) and brightness (Y) signals are output independently, achieving more faithful
B B
and Y, etc.). For details, refer to the TV's operating instructions.
B
Monitor TV
and Y)
B
Connecting a monitor TV
COMPONENT VIDEO OUT jack
• Connect the TV's color difference
(component)
(COMPONENT VIDEO INPUT) to the
COMPONENT VIDEO OUT jack using
Y P /C P /C
B B R R
75 Ω/ohms coaxial video pin-plug
COMPONENT VIDEO IN
cords.
ENGLISH
, P and Y/R-
R B
video input jacks
13