Dvd Auto Power Off Setting; Function Settings - Denon ADV-M71 Operating Instructions Manual

7 Press the ENTER button to enter the
settings.
• The next screen in the system setting
changing menu appears.
To cancel the settings after the adjustments have been made
Display the channel level adjustment screen, then use the • , ª,
cursor buttons to select "Level Clear" and select "Yes".
and 1
The level settings for all the speakers are set to 0 dB.
NOTE:
When the channel levels are adjusted at the channel level settings,
the adjusted values are applied to all playback modes.

[4] DVD Auto Power Off setting

• The ADV-M71 is equipped with a function for automatically setting
the power to the standby mode if no operation is performed for 30
minutes when the function is set to DVD. Here set whether to use
this function or not.
• By factory default this is set to "No".
1
If you are not at the system setting changing menu screen,
read step 1 and 2 on page 33.
2
At the system setting changing menu screen, use the
1 cursor buttons to select "DVD AUTO POWER OFF", then
press the ENTER button.
Remote control unit
• The DVD auto power off setting screen appears.
3
Use the 1 cursor buttons to select the "Auto Power
0 and
Off" mode.
Yes: The function for automatically turning the power off
B
when the function is set to DVD is activated.
No: The auto power off function is not activated.
B
4
ENTER
Remote control unit

[5] Function settings

0
• Set the LINE-1 and LINE-2 function names and turn the analog
• When used in combination with the D-M31 series, set according to
• It is also possible to assign the D.AUX digital input to LINE-2.
1
2
and
0
ENTER
Remote control unit
3
Press the ENTER button to enter the
settings.
• The next screen in the system setting
changing menu appears.
recording output (REC OUT) on or off.
the components being used and make system connections for
convenient system functions.
If you are not at the system setting changing menu screen,
read step 1 and 2 on page 33.
At the system setting changing menu screen, use the
cursor buttons to select "FUNCTION ASSIGNMENT", then
1
press the ENTER button.
Remote control unit
• The input function setting screen appears.
Use the • and ª cursor buttons to select the item to be set,
then use the cursor buttons to make the settings.
0 and 1
LINE-1 Function name selection ("MD" by default)
B
AUX CD-R
LINE-2 Function name selection ("TAPE" by default)
B
TAPE
LINE-1/LINE-2 REC OUT
B
: Set whether to turn the recording output during playback in
the Dolby Virtual Speaker mode when the function set to
DVD or the D.AUX exclusive digital input on or off.
On : The signals are output in stereo. (Factory default)
Off : The signals are not output. (Recording is not
possible.)
ENGLISH
ENTER
Remote control unit
0 and
ENTER
Remote control unit
MD MD/CD-R
AUX D.AUX
37