Denon DVD-1000 Operating Instructions Manual page 14

ENGLISH
!6
MENU button (MENU)
• Press this to display the DVD menu recorded on the disc.
!7
SETUP button (SETUP)
• Press this to display the default setting screen.
!8
Cursor buttons (
• Use these to move up, down, left and right when
selecting items on the setup screen, etc.
!9
SELECT button (SELECT)
• Press this to select the item selected with the cursor
buttons.
(3) Display
Lights during playback, flashes when the resume play memory function is activated.
DVD
Lights when a DVD is loaded in the disc tray.
14
, •, and ª)
0 1
Lights in the repeat play mode.
Lights in the still/pause mode.
ANGLE
PROG.
The title and elapsed track time are displayed here during
playback.
The title/chapter number is displayed here for DVDs, the
track number for video and music CDs.
Lights in the programmed play mode.
Lights during playback of multiple angles disc.
(2) Rear Panel
@0
Digital audio output connector (COAXIAL)
• Connect using an audio cord. Connect a commercially
available 75 /ohms pin-plug cord.
• Digital data is output from this connector.
@1
Digital audio output connector (OPTICAL)
• Connect using an optical fiber cable (available in stores).
• Digital data is output from this connector.
@2
Audio output connectors (AUDIO OUT)
• Connect using the included audio video cord.
@3
Video output connectors (VIDEO OUT)
• Connect using the included audio video cord.
@4
S-Video output connectors (S-VIDEO OUT)
• Connect using an S-Video connection cord (available in
stores).
@5
Component video output connectors
(COMPONENT VIDEO OUT)
• Connect using video cords (available in stores).
96kHz 24bit
Lights during playback of 24-bit
linear PCM sound.
Lights during playback of linear
PCM sound with a sampling
frequency of 96 kHz.