Power Management Setup - Intel P965 User Manual

UART2 Mode Select
This item allows you to determine which InfraRed(IR) function of the onboard I/O chip, this
functions uses.
Onboard Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that Provides Standard, ECP,
and EPP features. It has the following option:
Disabled
(3BCH/IRQ7)/
(278H/IRQ5)/
(378H/IRQ7)
Parallel Port Mode
SPP : Standard Parallel Port
EPP : Enhanced Parallel Port
ECP : Extended Capability Port
SPP/EPP/ECP/ECP+EPP
To operate the onboard parallel port as Standard Parallel Port only, choose "SPP." To operate the onboard
parallel port in the EPP modes simultaneously, choose "EPP." By choosing "ECP", the onboard parallel
port will operate in ECP mode only. Choosing "ECP+EPP" will allow the onboard parallel port to support
both the ECP and EPP modes simultaneously. The ECP mode has to use the DMA channel, so choose the
onboard parallel port with the ECP feature. After selecting it, the following message will appear: "ECP
Mode Use DMA" at this time, the user can choose between DMA channels 3 to 1. The onboard parallel
port is EPP Spec. compliant, so after the user chooses the onboard parallel port with the EPP function, the
following message will be displayed on the screen: "EPP Mode Select." At this time either EPP 1.7 spec.
or EPP 1.9 spec. can be chosen.

3-8 Power Management Setup

The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
ACPI Function
ACPI Suspend Type
Power Management
Video off Method
Video Off In Suspend
Suspend Type
MODEM Use IRQ
Suspend Mode
HDD Power Down
Soft-off by PWR-BTTN
Wake-Up by PCI card
Power On by Ring
Wake-Up by USB KB from S3(S4)
PS2 KB/MS Wake-up from S3-S5
Resume by Alarm
X Date (of Month)Alarm
X Time (hh:mm:ss)Alarm
> PM Timer Reload Events
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Line Printer port 0
Line Printer port 2
Line Printer port 1
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
Enabled
User Define
V/H SYNC+Blank
Yes
Stop Grant
3
Disabled
Disabled
Instant-off
Disabled
Disabled
Disabled
Disabled
Disabled
0
0 : 0 :0
Press Enter
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
38
Item Help
F1:General Help