The Functions Of The Control Panel - Daewoo DWC-LD141X Instruction Manual

The functions of the control panel

■ DWC-LD141X
Option
Option
Steam(option)
Water +(option)
Steam(option)
Water +(option)
Option
Option
Option
Low Temp Iron Cupboard Very Time
Option
Option
Low Temp Iron Cupboard Very Time
Steam(option)
Water +(option)
Steam(option)
Water +(option)
Option
Option
Option
Low Temp Iron Cupboard Very
Steam(option)
Water +(option)
Option Option
Steam(option)
Water +(option)
Low Temp Iron Cupboard Very
Option
Steam(option) Option
Water +(option)
Low Temp Iron Cupboard Very
Steam(option)
Water +(option)
E-10
Option
Low Temp Iron Cupboard Very
Option
Low Temp Iron Cupboard Very Time
Press this switch to turn the power on or off.
Operation and temporary stop is repeated as it is pressed.
When you want to change program in operating;
press the "Start/Pause" button → Select the program that you want to change →
press the "Start/Pause" button again.
You can select the course you want, and each lamp is turned on when that course
is selected.
Option
For the more detailed information, please refer to the page 14~21.
Steam(option)
Water +(option)
Steam(option)
It can be used to adjust temperature of water according to types of the load to be
Water +(option)
washed.
As the button is pressed, temperature of water is selected by
Cold → 30°C → 40°C → 60°C → 95°C
Option
By pressing the spin button, the spin speed can be chosen.
Low Temp Iron Cupboard Very Time
Steam(option)
If press "spin button" spin RPM change.
Water +(option)
Steam(option)
Water +(option)
You can select the course you want, and each lamp is turned on when that course
is selected.
Steam(option)
Water +(option)
As the button is pressed, the wash course is selected by
Wash → Soak → Pre-Wash
You can select the course you want, and each lamp is turned on when that course
Time
is selected.
Steam(option)
Water +(option)
It can be used to pre-engage time for wash.
Steam(option)
Water +(option)
• Steam - During washing time Steam is sprayed in Drum. Laundry is more clean.
• Water + - If you want to use more water, press this button.
Time
Use to memory program you want.
Steam(option)
Water +(option)
Time
• Is used to add a rinse, which may assist in removing traces of detergent residue.
• By selecting Rinse+ function, the rinse time and the rinse water are increased.
Steam(option)
Water +(option)
Time
Steam(option)
Water +(option)
Option
Steam(option)
Water +(option)
Option
Low Temp Iron Cupboard Very Time
Steam(option)
Water +(option)