Table of Contents
Advertisement
Electrical requirements
Electrical shock hazard
Failure to follow these instructions could result in death or serious injury.
WARNING
• Electrical earth is required on this washer
• If it does not fit the outlet, have a proper outlet
installed by a qualified electrician.
For your personal safety, this washer must be earthed.
C
This washer is equipped with a power supply cord 'A' having a earthing plug 'B'.
To minimize possible shock hazard, the cord must be plugged into a mating
earthing-type wall receptacle 'C'.
If a mating wall receptacle is not available, it is the personal responsibility
B
and obligation of the customer to have the proper earthed wall receptacle
installed by a qualified electrician.
A
Drain system
• Never forget to install drain hose before operating your washer.
• Open the packing box, and there is a drain hose inside the drum.
• Connect the drain hose to the drain outlet at the back side of the washer.
• Top of laundry tub must be at least 60cm high and no higher than 100cm from bottom of washer.
• When installing the drain hose to tub(sink), secure it tightly with a string.
• Proper securing of the drain hose will protect the floor from damage due to water leakage.
• When the drain hose is too long, do not force it back into the washer. This will cause abnormal noise.
Level adjustment
If the washer is installed on an unsuitable
floor, it could make considerable noise,
vibrate and cause a malfunction.
• Don't earth to a gas pipe.
• Don't change the power supply cord plug.
• Check with a qualified electrician if you are not
sure the washer is properly earthed.
Recommended earthing method
E-7
Hide quick links:
Advertisement
Table of Contents
