D-Link DGS-3024 Manual page 74

The following parameters can be set or are displayed:
Parameter
Current Time
Time Source
SNTP State
SNTP Primary Server
SNTP Secondary
Server
SNTP Poll Interval in
Seconds
Year
DGS-3024 Gigabit Ethernet Switch Manual
Figure 7- 36. Current Time: Status window
Description
Current Time: Status
Displays the time when the Switch was initially started for this session.
Displays the time source for the system.
Current Time: SNTP Settings
Use this pull-down menu to Enabled or Disabled SNTP.
This is the IP address of the primary server the SNTP information will be taken from.
This is the IP address of the secondary server the SNTP information will be taken
from.
This is the interval, in seconds, between requests for updated SNTP information.
Current Time: Set Current Time
Enter the current year, if you want to update the system clock.
60