Reboot Services; Reboot; Reset - D-Link DGS-3024 Manual

Managed 24-port gigabit ethernet switch
Hide thumbs Also See for DGS-3024:
Table of Contents

Advertisement

Click the OK button to continue.
Once the Switch configuration settings have been saved to NV-RAM, they become the default settings for the Switch. These
settings will be used every time the Switch is rebooted.

Reboot Services

Reboot

The following window is used to restart the Switch.
All of the configuration information entered from the last time Save Changes was executed will be lost. Click the Reboot
button to restart the Switch.

Reset

The Reset function has several options when resetting the Switch. Some of the current configuration parameters can be
retained while resetting all other configuration parameters to their factory defaults.
DGS-3024 Gigabit Ethernet Switch Manual
Figure 11- 7. Save Configuration Confirmation dialog box
Figure 11- 8. Restart System window
NOTE: Only the Reset System option will enter the factory default
parameters into the Switch's non-volatile RAM, and then restart the Switch.
All other options enter the factory defaults into the current configuration,
but do not save this configuration. Reset System will return the Switch's
configuration to the state it was when it left the factory
140

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents