D-Link DGS-3024 Manual page 106

AES128-CBC
AES192-CBC
AES256-CBC
ARC4
Cast128-CBC
Twofish128
Twofish192
Twofish256
HMAC-SHA1
HMAC-MD5
HMAC-RSA
HMAC-DSA
Password
Public Key
Host-based
Click Apply to implement changes made.
DGS-3024 Gigabit Ethernet Switch Manual
Use the pull-down to enable or disable the Advanced Encryption Standard AES128
encryption algorithm with Cipher Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the Advanced Encryption Standard AES192
encryption algorithm with Cipher Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the Advanced Encryption Standard AES-256
encryption algorithm with Cipher Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the Arcfour encryption algorithm with Cipher
Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the Cast128 encryption algorithm with Cipher
Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the twofish128 encryption algorithm. The
default is Enabled.
Use the pull-down to enable or disable the twofish192 encryption algorithm. The
default is Enabled.
Use the pull-down to enable or disable the twofish256 encryption algorithm. The
default is Enabled.
Data Integrity Algorithm
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the Secure Hash algorithm. The default is Enabled.
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the MD5 Message Digest encryption algorithm. The default
is Enabled.
Public Key Algorithm
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the RSA encryption algorithm. The default is Enabled.
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the Digital Signature Algorithm (DSA) encryption. The
default is Enabled.
Authentication Algorithm
This field may be enabled or disabled to choose if the administrator wishes to use a
locally configured password for authentication on the Switch. This field is Enabled by
default.
This field may be enabled or disabled to choose if the administrator wishes to use a
publickey configuration set on a SSH server, for authentication. This field is Enabled
by default.
This field may be enabled or disabled to choose if the administrator wishes to use a
host computer for authentication. This parameter is intended for Linux users requiring
SSH authentication techniques and the host computer is running the Linux operating
system with a SSH program previously installed. This field is Enabled by default.
92