D-Link DGS-3024 Manual page 116

To delete an Enable Method List defined by the user, click the
desired to be deleted. To modify an Enable Method List, click on its hyperlinked Method List Name. To configure a Method
List, click the Add button.
Both actions will result in the same window to configure:
To define an Enable Login Method List, set the following parameters and click Apply:
Parameter
Method List Name
Method 1, 2, 3, 4
DGS-3024 Gigabit Ethernet Switch Manual
Figure 8- 19. Enable Method List - Edit window
Figure 8- 20. Enable Method List - Add window
Description
Enter a method list name defined by the user of up to 15 characters.
The user may add one, or a combination of up to four of the following authentication
methods to this method list:
local_enable - Adding this parameter will require the user to be authenticated
using the local enable password database on the Switch. The local enable
password must be set by the user in the next section entitled Local Enable
Password.
none - Adding this parameter will require no authentication to access the Switch.
radius - Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
under the Delete heading corresponding to the entry
102