Product Changes - Rheem 862 27 Series Service Instructions Manual

PRODUCT CHANGES

®
EziSET - Smartphone Remote Control
®
EziSET enables remote control of a CF water heater via a smartphone where the hot water
temperature set point and bath fill features can be controlled by the user through an App
installed on their own personal smartphone. Additionally, any applicable fault codes and
service contact details will be displayed on the App in the event of a heater fault.
®
EziSET is not provided as standard with the CF heater, it is an optional extra that is
available to purchase in kit form that is to be retro-fitted to a new or existing installation.
Available from February 2019 using part number 052310 the kit is suitable for use with 50
models only (876027 / 876627 / 866027 / 866627 models).
The kit is required to be installed by a qualified technician; it
includes a PCB (refer A) that is to be fitted inside the water
heater and a PLT plug (Power Line Telecommunication) that
is to be connected to a GPO and wireless router in the home
(wireless router is not supplied however any home with an
existing Wi-Fi network will have one).
The householder is responsible for the download of the free
®
EziSET App to their own compatible smartphone. Must have
a minimum operating system of IOS 8.1 (iPhone 5 or later;
excluding iPhone 5C) or Android 4.0 or later (Windows phone
is not compatible).
Up to 10 devices can simultaneously communicate with an EziSET
however only one user at a time can have priority control and alter heater settings.
The conventional hard-wired remote temperature controllers will continue to be available for
use where a home Wi-Fi network or a compatible mobile device are not available.
TM049 27L Continuous Flow Service Instructions
REV AL – Issued April 2019
This document is stored and maintained electronically by Rheem Technical Support. All printed copies are deemed "uncontrolled".
o
C
®
enabled heater
11