North Star M157115C.2 Owner's Manual page 44

Maintenance & Repair
Shuttle
Assembly
(Side View)
4) Observe the "Shuttle Assembly" and internal portion of "Body" for
obstructions, hard water deposits and any other foreign debris. Remove the
foreign debris with light scraping or compressed air. If no additional
cleaning is required continue to Step 7. If additional cleaning is required
continue to step 5.
5) Remove the "Body" from the plastic "Enclosure" and soak the "Body" in
CLR or similar solution to dislodge excess buildup. The screws (QTY 5) in
the "Enclosure" are TORX T10.
6) Rinse "Body"
7) When cleaning is complete reinstall the "Body" into the "Enclosures",
taking care not to cause damage. Tighten the "Screws" into the body until
they are snug. Do not over-tighten the screws.
8) Insert the "Shuttle Assembly" with the rounded end first, into the body.
Align with grooves.
44
Assembly
(Bottom View)
TORX T10
Screw
Enclosures
Body
Magnet
Internal
Sections