D-Link DIR-822 User Manual page 49

Section 4 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your Internet Service
Provider (ISP) uses a PPTP connection. Your ISP will provide you with a
username and password.
General Settings
Select your connection type.
Connection Type:
Select your connection interface.
Interface:
Enter name for your connection.
Connection Name:
Toggle this switch to enable the connection. This is enabled by default.
Enable
Disabling this feature may disable your Internet connection.
Connection:
Toggle this switch to enable Network Address Translation (NAT). This
NAT:
setting is enabled by default.
Toggle this switch to enable WAN Ping. This setting is disabled by
Ping:
default.
D-Link DIR-822 User Manual
PPTP
45