Picture Settings - Bosch MIC inteox 7100i User Manual

26 en | Camera
This mode is used for monitoring fast moving objects like cars in traffic scenes. Motion
artifacts are minimized and the image is optimized for a sharp and detailed picture in color
and monochrome.
–
This mode provides a more vivid image with increased contrast, sharpness, and saturation.
–
In this mode, the camera does not switch to monochrome mode at low light levels. The mode
is optimized to minimize motion artifacts and to capture the color of vehicles/pedestrians and
traffic lights, even at night, for scenarios such as city surveillance and traffic monitoring.
–
This mode gives optimized performance when using the MIC illuminator accessory.
–
If necessary, select a custom mode.
–
If necessary, select a second custom mode.
Mode ID
The name of the selected mode is displayed.
Copy mode to
Select the mode from the drop-down menu to which you wish to copy the active mode.
Note: To restore the default setting of all scene modes, you must click the SC setting.
Restore mode defaults
Click Restore Mode Defaults to restore the factory default modes. Confirm you decision.
7.2.1

Picture Settings

Color
White Balance
Adjusts the color settings to maintain the quality of the white areas of the image.
–
–
–
–
–
Red Gain
The red gain adjustment offsets the factory white point alignment (reducing red introduces
more cyan).
Blue Gain
The blue gain adjustment offsets the factory white point alignment (reducing blue introduces
more yellow). It is only necessary to change the white point offset for special scene
conditions.
Sodium red level
Adjust the level of red for sodium vapor lighting with the slider from 0 to 255.
Sodium blue level
Adjust the level of blue for sodium vapor lighting with the slider from 0 to 255.
Note: The fields Sodium red level and Sodium blue level appear only when the value in the
field White balance is "Sodium lamp auto" or "Sodium lamp."
2022-01 | 1.13 |
Vibrant
Color Only (Traffic)
Illuminator
Custom mode #1
Custom mode #2
ATW: allows the camera to adjust color reproduction continuously.
AWB hold: places the ATW on hold and saves the color settings.
Extended ATW (default): allows the camera to adjust constantly for optimal color
reproduction.
Manual: Red and Blue gain can be set manually to a desired position.
Sodium lamp auto: Automatically adjusts for sodium vapor light to restore objects to
their original color.
User Manual
MIC inteox 7100i
Bosch Security Systems