Table of Contents
Advertisement
RADIO Operations
Listening to the Radio
■ Switch to the tuner mode.
■ Press the [BAND] button on the remote control unit or press the [RTN] button to select the
radio band. Each time you press the [RTN] button, the radio reception band is changed in the
following order : FM1 ▶ FM2 ▶ FM3 ▶ AM1 ▶ AM2 ▶ FM1 ...
■ Press the [MENU] button to display the stored PRESET lists.
■ Press the [| ◀ ◀ ] or [▶ ▶ | ] button to seek up or down. If you continue to pressthe [|
manual tuning will be done in the direction of lower frequencies. If you continue to press the
[▶ ▶ | ] button, manual tuning will be done in the direction of higher frequencies.
■ Frequency map
BAND
FM 1,2,3
AM 1,2
Auto store
■ The Auto Store is a function for storing up to 6 stations which are automatically tuned in
sequentially. If 6 receivable stations cannot be received, a previously stored station remains at
the memory position.
■ Press and hold the [MENU] button for more than 2 seconds. A beep sounds and the stations
with good reception are stored automatically to the PRESET channels.
Memorizing the PREsET
■ By selecting PRESET number, preferred PRESET memories stations between 1 ~ 6 can be
selected.
■ To memorize the frequency, choose the desirable PRESET number and press the [ENT]
button for more than 2 seconds.
1
RECEIVINg
BAND(hz)
87.9 ~ 107.9 M
530 ~ 1710 K
sTEP
sEEK(Khz)
MANU(Khz)
200
10
]button,
◀ ◀
sTEP
IF
(hz)
200
10.7 M
10
450 K
Advertisement
Table of Contents
