3.1
Main body
3.1.1 Removing the video board (See Fig.1 to 3)
(1) Remove the metal cover.
(2) Disconnect the card wire from
and then remove the two screws A attaching the tuner
pack. (See Fig.1 and 2)
(3) Remove the card wires from connector
of the video board. (See Fig.1)
(4) Remove the three screws B attaching the video board from
backside of main body. (See Fig.2)
(5) Remove the two screws C attaching the video board. (See
Fig.3)
Reference:
For other method, please refer the service manual TH-P3 (No.
MB512).
1-8 (No.MB541)
SECTION 3
DISASSEMBLY
CN652
of the video board,
CN601
and
CN651
CN652
CN651
Video board
Fig.1
B
B
Fig.2
C
VIdeo board
Fig.3
CN601
Tuner pack
A
C