JVC TH-P3A Service Manual page 28

3.2.3 Removing the feed motor assembly
(See Fig.13)
(1) Remove the one screw G attaching the feed motor assem-
bly.
(2) Remove the feed motor wires from solder part of spindle
motor board.
3.2.4 Removing the spindle motor assembly
(See Fig.14)
(1) Remove the two screws H attaching the spindle motor from
spindle motor board.
Splder part
Middle gear
Lead screw
Fig.13
H
Fig.14
G
Spindle motor
(No.MB512)1-19