JVC TH-P3A Service Manual page 31

4.2.3 PROCESS
Below, FL (LCD) display to operation and communication with a DVD back end micon are shown.
* Since the number of beams changes with sets about FL (LCD) display, also set differing from the contents of specification to O.K.
* Since there are arrangement and a relation of existence with a set also about a key, also set differing from the contents of specifica-
tion to O.K.
STEP OPERATION
Release AC, press PLAY & POWER key
1
together of main unit.
2 Keep STEP 1, connect AC.
Press PAUSE key of main unit.
1
NORMAL initialize
Long press(4sec) STOP key of main unit.
2
FULL initialize
3 Press MENU key of remocon.
4 Press MENU key of remocon.
Press MENU key of remocon.
5
6 Press MENU key of remocon.
Press 1 at 10 key of remocon.
1
Press 2 at 10 key of remocon.
2
Press 3 at 10 key of remocon.
3
4 Press 4 at 10 key of remocon.
5
Press 5 at 10 key of remocon.
6 Press 6 at 10 key of remocon.
Press 7 at 10 key of remocon.
7
Press 8 at 10 key of remocon.
8
9
Press 9 at 10 key of remocon.
Press 10 at 10 key of remocon.
10
Press 0 at 10 key of remocon.
11
1-22 (No.MB512)
MOVEMENT
The destination, a region, study state
indication mode.
Indication the destination by TEST mode
power on.
Device key check sum indication mode.
Indication check sum of device key for FL.
(4byte)
Micon version indication mode.
Indication the micon version for FL.
FL all on mode.
All on the FL and LED.
FRONT END check mode.
Indication the FRONT END check mode
for FL.
Disc startup and through playback
(Playback starts from the start position).
Existence of WOBBLE.
0 : WOBBLE_NO_CHECK (No check)
1 : WOBBLE_PRESS_MEDIA (press)
2 : WOBBLE_MINUS_MEDIA
(DVD-R/-RW media)
3 : WOBBLE_PLUS_MEDIA
(DVD+R/+RW media)
Port check mode
(TRACK,INDEX,DEMP,COPY)
1 : INDEX Port = High
2 : TRACK Port = High
3 : COPY Port = High
4 : DEMP Port = High
CD_LD on & Laser current indication.
DVD_LD on & Laser current indication.
DVD_SL x 1 jitter measurement mode.
Memory backup contents (0x00-0x63)
indication (BWD)
Backup memory contents (0x00-0x63)
indication (FWD)
Temperature sensor (AD value) indication.
DVD-DL (parallel, opposite),
Serch & jitter measurement of the
specified position of DVD-SL.
MONITOR outout select.
1 : SRV_MONI_CIRC
2 : SRV_MONI_SERVO
3-5 : SRV_MONI_ANALOG
6-7 : SRV_MONI_DRC
8-11 : SRV_MONI_SERVO_JIG
12 : SRV_MONI_DEFAULT
FL (LCD) indication
1 2 3 4 5 6 7 8 9 10
T J C #
T J C #
T J C #
1 2 3 4 5 6 7 8
a b b c c c c
C H E C K
C H E C K
C H E C K
11 12 13