Table of Contents
Advertisement
CTK691E01-01.book 88 ページ ２００３年９月２９日 月曜日 午後４時４７分
DSP Algorithm List
DSP Algorithm List
00 :Auto Pan
Function
Continually performs left-right panning of the input
signal in accordance with an LFO.
Parameters
0 :
Rate (Range: 0 to 127)
Adjusts the panning rate.
1 :
Depth (Range: 0 to 127)
Adjusts the panning depth.
01 :Tremolo
Function
Adjusts volume of input signal in accordance with an
LFO.
Parameters
0 :
Rate (Range: 0 to 127)
Adjusts the tremolo rate.
1 :
Depth (Range: 0 to 127)
Adjusts the tremolo depth.
02 :2BandEQ
Function
This is a two-band equalizer.
Parameters
0 :
Low Frequency (Range: 0 (200Hz), 1 (400Hz), 2
(800Hz))
Adjusts the cutoff frequency of the low-band
equalizer.
1 :
Low Gain (Range: –12, –11, –10 to 0 to +10, +11,
+12)
Adjusts the gain of the low-band equalizer.
2 :
High Frequency (Range: 0 (6.0KHz), 1
(8.0KHz), 2 (10KHz))
Adjusts the cutoff frequency of the high-band
equalizer.
3 :
High Gain (Range: –12, –11, –10 to 0 to +10, +11,
+12)
Adjusts the gain of the high-band equalizer.
03 :3BandEQ
Function
This is a three-band equalizer.
Parameters
E-88
0 :
Low Frequency (Range: 0 (200Hz), 1 (400Hz), 2
(800Hz))
Adjusts the cutoff frequency of the low-band
equalizer.
1:
Low Gain (Range: –12, –11, –10 to 0 to +10, +11,
+12)
Adjusts the gain of the low-band equalizer.
2:
Mid Frequency (Range: 0 (1.0KHz), 1 (1.3KHz),
2 (1.6KHz), 3 (2.0KHz), 4 (3.0KHz), 5 (4.0KHz),
6 (6.0KHz), 7 (8.0KHz))
Adjusts the center frequency of the mid-band
equalizer.
3:
Mid Gain (Range: –12, –11, –10 to 0 to +10, +11,
+12)
Adjusts the gain of the mid-band equalizer.
4:
High Frequency (Range: 0 (6.0KHz), 1
(8.0KHz), 2 (10KHz))
Adjusts the cutoff frequency of the high-band
equalizer.
5:
High Gain (Range: –12, –11, –10 to 0 to +10, +11,
+12)
Adjusts the gain of the high-band equalizer.
04 :LFO Wah
Function
This is a "wah" effect that can automatically affect the
frequency in accordance with an LFO.
Parameters
0:
Input Level (Range: 0 to 127)
Adjusts the input level. The input signal can
become distorted when the level of the sound
being input, the number of chords, or the
Resonance value is large. Adjust this parameter
to eliminate such distortion.
1:
Resonance (Range: 0 to 127)
Adjusts the resonance of the sound.
2:
Manual (Range: 0 to 127)
Adjusts the frequency used as the basis for the
wah filter.
3:
LFO Rate (Range: 0 to 127)
Adjusts the rate of the LFO.
4:
LFO Depth (Range: 0 to 127)
Adjusts the depth of the LFO.
05 :Auto Wah
Function
This is a "wah" effect that can automatically affect the
frequency in accordance with the level of the input signal.
705A-E-090A
- Quick Links:
- Selecting Rhythm
Hide quick links:
Advertisement
Table of Contents
