Casio CTK-691 User Manual page 22

CTK691E01-01.book 20 ページ ２００３年９月２９日 月曜日 午後４時４７分
Basic Operations
Drawbar Organ Tones:
50 Preset Tones + 100 User Tones
Number of
Number Tone Type
Tones
000-049 50 Preset Tones
100-199 100 User Tones (*6)
*1: See "Changing Tones and Configuring DSP Effect
Settings" on page E-21.
*2: Memory area for tones created by you. See "Synthesizer
Mode" on page E-44. User tone areas 600 through 699
initially contain the same data as DSP types 000 through
099.
*3: Depends on source tone or user setting. See "Synthesizer
Mode" on page E-44 for more information.
*4: Area for data transferred from a computer. See "Using
the Data Download Service" on page E-82 for more
information. For information about waveforms, see
"Creating a User Tone" on page E-47.
*5: Depends on tone. This status can be checked by viewing
the DSP button. See "DSP Button" on page E-28 for more
information.
*6: Memory area for tones created by you. See "To edit a
drawbar organ tone" on page E-23. User drawbar organ
tone areas initially contain two sets of the same data as
drawbar organ tones types 000 through 049.
You cannot select tone numbers not included in the above
ranges (standard tones 516 through 599 and 720 through
799, and drawbar organ tones from 050 to 099). When you
use the [+] and [–] buttons to scroll through tone numbers,
scrolling jumps across the unused numbers. Pressing [+]
when 515 is selected, for example, jumps to 600.
E-20
To select a tone
1.
DSP Line On/Off
(*1)
2.
On/Off (*5)
On/Off (*3)
3.
Always input all three digits for the tone number, including
leading zeros (if any).
You can also increment the displayed tone number by
pressing [ + ] and decrement it by pressing [–].
When one of the drum sets is selected (tone numbers 500
through 515), each keyboard key is assigned a different
percussion sound. See page A-12 for details.
Polyphony
The term polyphony refers to the maximum number of notes
you can play at the same time. The keyboard has 32-note
polyphony, which includes the notes you play as well as the
rhythms and auto-accompaniment patterns that are played
by the keyboard. This means that when a rhythm or auto-
accompaniment pattern is being played by the keyboard, the
number of notes (polyphony) available for keyboard play is
reduced. Also note that some of the tones offer only 10-note
polyphony.
Find the tone you want to use in the tone list and
note its tone number.
Press the TONE button.
Use the number buttons to input the three digit
tone number for the tone you want to select.
Example:
To select "332 ACOUSTIC BASS GM", input 3, 3
and then 2.
705A-E-022A