Casio CTK-691 User Manual page 50

CTK691E01-01.book 48 ページ ２００３年９月２９日 月曜日 午後４時４７分
Synthesizer Mode
Vibrato Delay (Range: –64 to 00 to +63)
Specifies the amount of time before vibrato starts.
Vibrato Rate (Range: –64 to 00 to +63)
Rate (speed) of the vibrato effect
Vibrato Depth (Range: –64 to 00 to +63)
Depth of the vibrato effect
Octave Shift (Range: –2 to 0 to +2)
Up/down octave shift
Level (Range: 000 to 127)
This parameter controls the overall volume of the tone. The
greater the value, the greater the volume. Setting a level of
zero means that the tone does not sound at all.
Touch Sensitivity (Range: –64 to 00 to +63)
This parameter controls changes in the volume of the tone in
accordance with the pressure applied to the keyboard keys. A
greater positive value increases the volume of the output as
pressure increases, while a negative value decreases volume
with increased keyboard pressure. A setting of zero specifies
no change in output volume in accordance with keyboard
pressure.
E-48
Reverb Send (Range: 000 to 127)
This parameter adjusts reverb.
Chorus Send (Range: 000 to 127)
This parameter adjusts chorus.
DSP Line (Settings: on, oFF)
This parameter controls whether or not the DSP effect is used.
DSP Settings
Use the DSP editing screen to select the DSP type and to edit
parameters.
1.
Select a tone, press the SYNTH button, and
then configure parameter settings.
2.
After everything is the way you want, press the
[ ] CURSOR button once. This advances to
the DSP parameter editing screen.
Pressing the [ ] CURSOR button returns to the Synthesizer
Mode parameter screen.
This setting specifies DSP parameters. See "DSP Parameters"
on page E-27, "Effect List" on page A-18, and "DSP Algorithm
List" on page E-88 for more information.
If you store an original tone with the DSP line turned on
(see next page), simply recalling the tone automatically
changes the DSP line, DSP type, and DSP parameter
settings. This simplifies the recall of original tones that
include a DSP effect.
An indicator appears next to DSP on the display while you
are making DSP type or DSP parameter settings.
705A-E-050A