3-2. STANDARD DISASSEMBLY DRAWINGS
► This is a standard disassembly diagram and may differ from the actual product.
Use this material as a reference when disassembling and reassembling the product.
Part
Assy Cover Top
Figure
Water valve
Noise filter
Sensor pressure
Description
1. Remove the 2 screws holding the Top
Cover at the back of the unit.
2. Remove the top-cover by lifting it up after
pulling it back about 15mm.
3. Then, the Water (Pressure) Sensor, Noise
Filter and Water Valve can be replaced.
Disassembly and Reassembly _ 11