3-2. STANDARD DISASSEMBLY DRAWINGS
▶ This is a standard disassembly diagram and may differ from the actual product.
Use this material as a reference when disassembling and reassembling the product.
Part
Sub and Main PCB
(continued)
10 _ Disassembly and Reassembly
Figure
Description
1. Remove the 6 screws holding the control panel
assembly and separate cover panel.
2. Separate the both hooks. (Left and Right)
3. Separate the cover panel upward.
If it is difficult to disassemble, use the (-)
driver to disassemble hooks.
(Be careful damage of hooks.)
4. Remove the 2 screws holding the control panel
assembly and turn the panel over.
5. Pull the Encoder-Knob to separate it and then
remove the 4 fixing screws.
When reassembling the PCB, take care that
you do not damage the control-panel fixing
hook. After replacing the sub PCB, check the
key operation.