TP-Link TD-W8961N User Manual page 59


Rule Unmatched: If the current rule can not match, and you select Forward, the modem
router will skip the rule and transmit directly. If you select Next, the modem router will find
the next filter rule (show in Filter list) to match.

IP/MAC Filter Listing: This displays the information about the MAC Filter rules.
To add a MAC Address filtering entry:
For example: If you want to block the PCs with MAC addresses 00:0A:EB:00:07:BE and
00:0A:EB:00:07:5F to access the Internet, you can configure as follows. Presume the rules are
both aimed at the interface PVC0, and their indexes are (1, 1) and (1, 2).
Step 1: Select IP/MAC Filter
Select the
specific rule for the example.
Step 2: Select the
select the Interface PVC0, and select the Direction

Note:
If you want to make the rule take effect, please select
Step 3: Enter the MAC Address
Step 4: Finally, click
Step 5: Go to Step 2 to configure the next rule: Block the PC with MAC address
00:0A:EB:00:07:BE to access the Internet.

Note:
After you complete the MAC filter rules for the example, the Filter list will show as follows. You
can enter the IP / MAC Filter Set Index
as the Filter Type Selection.
MAC as the Rule Type on the Filter screen, then you can configure the
IP/MAC Filter Set Index
and select the Unmatched rule as Next.
SAVE to save the entry.
to view the information about the rule.
and IP/MAC Filter Rule Index
Outgoing
Yes to active the rule.
56
User Guide
for the rule, then
for the first rule.