Guest Network - TP-Link TD-W8961N User Manual

IPv4 Mask Length: The length of the selected WAN connection's IPv4 mask.


6RD Border Relay IPv4Addr: The IPv4 address of the border relay router of 6RD tunnel.

Use PVC: Select the PVC from the drop-down list.

Note:
To enable the function, there should not be any IPv6 WAN connections.

4.2.5 Guest Network

Go to Interface Setup
feature allows you to create a separate network for your guests without allowing them to
access your main network and the computers connected to it.
You can enable or disable Guest Network. The default setting is disabled. When you enable this
function, you could set wireless parameters for Guest Network.
SSID: The guest network name. When setting up a Guest network, it is strongly

recommended to use a name that easily distinguishes it from your primary network.
→
Guest Network, and you will see the Guest Network screen. This
39
User Guide