Installing The Front Baffle - Toro Groundsmaster 120 Operator's Manual

1
3
4
Figure 2
1. Linchpin
2. Thrust Washer

Installing the Front Baffle

1. Position the right side of the baffle inside the mower,
so that it is 26 mm (1 in.) inside and 13 mm (1/2 in.)
down from the side discharge opening of the deck
(Fig. 3).
2. Position the left side of the baffle inside the mower
and flush with left edge of mower (Fig. 4).
3. Clamp the baffle in place.
2
2
m–2559
3. Carrier Frame Mounting
Tube
4. Castor Wheel Fork
5
2
1
3
Figure 3
1. Front view of deck
2. Front baffle
3. 13 mm (1/2 in.)
4. Using the front baffle as a template, mark and drill
five 9 mm holes in mower.
5. Secure the front baffle to the mower with 5 bolts
(5/16 x 3/4 in.) and with 5 lock nuts (5/16 in.) (Fig. 4).
Note: Make sure the bolt head is on the inside of the deck.
Refer to figure 4.
4
1
2
3
Figure 4
1. Front baffle
2. Bolt, 5/16 x 3/4 in.
3. Lock nut
7
2
4
m–5724
4. 26 mm (1 in.)
5. Side discharge opening
5
1213
4. Side discharge
5. Left edge