Assembly
Note: Determine the left and right sides of the machine
from the normal operating position.
Loose Parts
Note: Use the chart below to identify parts used for assembly.
DESCRIPTION
Castor Wheel Assembly
Thrust Washer
Linchpin
Baffle
Bolt, 5/16 x 3/4 in.
Lock nut, 5/16 in.
Cap Screw, 3/8 x 1-3/4 in.
Locknut, 3/8 in.
Shim
Flange Bolt, 3/8 x 7/8 in.
Flat Washer
Drive Belt
Operator's Manual
Parts Catalog
Installing the Castor Wheels
1. Place two thrust washers onto the castor wheel forks
(Fig. 2).
2. Insert the castor wheel forks into the carrier frame
mounting tubes (Fig. 2).
3. Install two thrust washers onto the castor wheel forks,
then secure with linchpins (Fig. 2).
QTY.
2
8
Install castor wheels to carrier frame
2
1
5
Installing the front baffle
5
4
4
2
Install carrier frame to traction unit
4
4
1
Mount to cutting unit and traction unit
1
Read before operating
1
Ordering parts
6
USE