Table of Contents
Advertisement
4 Disassembly and Assembly Instructions
4.1.
Disassembly Instructions
1. Insert a small flat head screwdriver into the Groove of the
Shaft Cover as shown in Figure 4.
2. Remove the Shaft screw and take off the Shaft from Main
body as shown in Figure 5.
3. Remove the spring by pull out of the Housing side and
Press plate side as shown in Figure 6.
4. Remove the two tapping screws from the Press Plate
Cover as shown in Figure 7.
Be careful not to lose the spring.
5. Take off the Press Plate Cover as shown in Figure 8.
4
Advertisement
Table of Contents
