4 Disassembly and Assem-
bly Instructions
4.1.
Disassembly Instructions
1. Remove the two Torx screws from the Escutcheon, then
remove Escutcheon, the Filter and the Fixing ring.
2. Separate the Housing A and B by unfastening Housing
B at indicated area.
4.2.
Assembly Instructions
1. Assembly Select switch to Heater blocka and Connector
cover by soldering Lead wires connect to the positions.
2. Assembly Connector cover block to Heater block by sol-
dering Lead wires connect to the positions.
3. Assembly Rectifier ass'y block to Heater block by solder-
ing Lead wires connect to the positions.
4