Programming The Universal Remote Control - Cal Spas Portable Spas Owner's Manual

Using the Entertainment System
Programming the Universal
Remote Control
The Cal Spas universal remote has been pre-
programmed to function with the entertainment system
the spa has been configured with. However, in case you
need to reprogram the remote, use the device list below
for the programming code.
1. Turn on the device (TV, CD player, DVD player) with
the manufacturer's remote control.
2. Press the button on the remote for the device you
want to program (TV, CD, DVD, etc.)
3. Press and hold the SETUP button until the LED
blinks twice.
4. Enter the device code. If you perform this procedure
correctly, the LED will blink twice. If not, repeat steps
2 and 3.
Device Manufacturer
Samsung 42" plasma
River Park 20"
Aeware
Sony CDX-GT10M
Sony CDX-HS70MW
Page 36
Device
Type Code
TV 1312
TV 1530
DVD 1866
CD
CD
2009 Portable Spa Owner's Manual
LTR20091001, Rev. A