Gateway MX7118 Hardware Replacement Manual page 9

8 Pull the memory module out of the slot.
9 Hold the new or replacement module at a 30-degree
angle and insert it into the empty memory slot. This
module is keyed so it can only be inserted in one
direction. If the module does not fit, make sure that
the notch in the module lines up with the tab in the
memory bay.
Use only memory modules designed for your
Important Gateway notebook.
Technical Support
See the label on the bottom of the notebook for Customer
Care Information. See your hardware guide for important
safety, regulatory, and legal information.
2
10 Gently push the module down until it clicks in
place.
11 Replace the memory bay cover, then replace the
cover screw.
12 Insert the battery, then turn your notebook over.
13 Connect the power adapter, the modem cable, and
the network cable.
14 Turn on your notebook.
© 2006 Gateway, Inc. All rights reserved. Gateway and
eMachines are trademarks or registered trademarks of
Gateway, Inc. in the United States and other countries.
All other brands and product names are trademarks or
registered trademarks of their respective companies.
www.gateway.com
Replacing the Memory Module