Table of Contents
Advertisement
TW1-QS.indb 14
Using The Buttons
Power on
Press and hold until you hear "Power on"
Power off
Adapters automatically power off when placed in charge case
Power off manually
Press either adapter button and hold until you hear "Power off"
Pair Bluetooth
From power on, Press and hold the button on the primary adapter
for about 5 seconds until you hear "Bluetooth pairing mode".
Play/Pause
Press either button once
Answer/End a call
Short press on either adapter
Decline a call
Long press on either adapter
Mute during a call
Long press during a call on either adapter
Environment mode On/Off
Press either adapter 2 times quickly
Activate voice assistant
Triple press either adapter
Check battery status
Press button on charge case
LED indicators
Adapter LEDs
Bluetooth pairing
Alternating red and blue
Bluetooth connected
Blue for 2 seconds, then off
Bluetooth connection lost
Slow blinking blue
Low battery
Slow blinking red
Charging case LEDs
Adapters charging
Red
Adapter charge complete
Green, then LED turns off
Charging case charging
On bottom of charging case, white LEDs blinking until fully charged,
then all LEDs remain on
Charging case battery status
On bottom of charging case,
(push battery button)
3 white LEDs: 67-100% charged
2 white LEDs: 34 - 66% charged
1 white LED: 5 - 33% charged
1 white blinking LED: 0-4% charged
14
11/11/2019 2:52:42 PM
Advertisement
Table of Contents
