Table of Contents
Advertisement
Up and Down Buttons
Volume Up/Down
Next track
Previous track
Check Battery Status
Note: Your phone may not be compatible with some functions.
Charging the Earphones
Red LED indicates low battery.
1. Connect earphones to charging device using supplied cable.
2. LED is red while charging.
3. When earphones are charged, LED turns off.
Warning: Before charging, make sure the product is at room temperature, between 0 to 45°C (32 to 113°F).
Note: Use this product only with an agency approved power supply which meets local regulatory requirements
(e.g., UL, CSA, VDE, CCC, INMETRO).
BT1 FAQ
For more information, or to view other Frequently Asked Questions, visit the Shure FAQ (https://www.shure.com/
americas/support/find-an-answer).
Remote + Mic, Telephony, Voice Command and In-App use
Q.) How do I pair my wireless Sound Isolating™ earphones with my device?
A.) With the wireless earphones OFF, activate pairing mode by holding center button for 7 seconds on the remote.
Navigate to Bluetooth settings in the source device settings, and the device SHURE BT1 should appear in avail-
able devices. Select, and your device should be paired.
Q.) How do I set up multi-point pairing? How do I change active devices?
Click + or -
Press and hold +, 3 seconds
Press and hold -, 3 seconds
Press and hold + and -, together
Shure Incorporated
13/21
Advertisement
Table of Contents
