Gateway Profile Profile 5 User Manual page 69

- OR -
If you are adding a memory module to an empty memory module bank, gently pull
the plastic tabs away from the sides of the memory module bank.
4
Align the notch on the new memory module with the notch on the memory module
bank and press firmly into the bank. The tabs on the sides of the memory module
should secure the memory module automatically. When the module is secure, you
hear a click.
5
Close the case by following the instructions in
6
Turn on your computer. Windows starts and the Windows desktop appears.
7
Click ,
Start Control Panel
Click . The amount of memory in your computer is shown at the bottom of
System
the System Properties window in the General tab.
, then click
Performance and Maintenance
www.gateway.com
"Closing the case" on page
(if in Category View).
57.
63